Brand Name: TF
Model Number: CTF
Place of Origin: Tianjin, China (Mainland)
Standard or Nonstandard: Standard
Structure: Ball
Pressure: Low Pressure
Power: electric,manual,motor
Material: Plastic
Temperature of Media: Normal Temperature
Media: Pure water,water,50% glycol,Oil,Air
Port Size: DN20,DN25,DN32,DN40,DN50
Application: General
Actuator code: CTF series actuator
Voltage: DC12V,DC24V, AC220V
Torque output: 25 NM- 100NM
Working Pressure: 0-1.6 Mpa(16bar)
Temperature: 0 to 100 Degree Celsius
Size Scope: ball valve,15-65(mm) | butterfly valve 40-125(mm)
Open/Close time: 10 -- 25sec
Number of wires: 2-5 wires
Protection class: IP67
24V DC ELECTRIC VALVE ACTUATOR WITH 3PC THREAD END BALL VALVE for equipment,auto-control water system
CTF-010 Actuator valve AC220V,UPVC
Actuator code: CTF series
Voltage:DC12V,DC24V, AC220V,
Torque output: 25 NM- 100NM
Working Pressure: 0-1.6 Mpa(16bar)
Temperature:0 to 100 Degree Celsius
Size Scope: ball valve,15-65(mm); butterfly valve 40-125(mm)
Open/Close time: 10 -- 25sec
Number of wires: 2-5 wires
Protection class : IP67
Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off. This actuator run low cost and does not need to be maintained.
DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
Manual/electrically operated integrated design, Simply to operate.
Large output torque, inner protecting overheated device, working stable and reliable.
Low noise, good leak-proof. Through the coupling, the valve will be installed and operated easily