Brand Name: TF
Model Number: CTF-series
Place of Origin: Tianjin, China (Mainland)
Standard or Nonstandard: Standard
Structure: Ball
Pressure: Medium Pressure,16Bar 1.6Mpa
Power: electric motor
Material: brass or ss304 stainless steel
Temperature of Media: 0 to 100 Degree Celsius
Media: Pure water,water,50% glycol,Oil,Air
Port Size: DN15~DN400
Application: General
voltage: 12v,24v,220v
Working Pressure: 0-1.6 Mpa(16bar)
output torque: 100NM
Number of wires: 2-5 wires
Open/Close time: 10 -- 25sec
Size Scope: ball valve,15-65(mm) | butterfly valve 40-125(mm)
Protection class: IP67
Parameters
Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off. This actuator run low cost and does not need to be maintained.
DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
Manual/electrically operated integrated design, Simply to operate.
Large output torque, inner protecting overheated device, working stable and reliable.
Low noise, good leak-proof. Through the coupling, the valve will be installed and operated easily.
Scope of application:
IC card water meter, heat meter, central air-conditioning fan coil, fire sprinkler, sanitary ware, smart table support, institutions of higher learning water-saving systems, automatic control system.